Project Riddler's Ride - 1976 Plymouth Duster
Spent most of the day in the garage working on the car. Today I wanted to start getting the firewall mocked up with the hydroboost and clutch master. So lets start with those.
Here's the hydroboost mockup.
I still need a few things to bolt the rod to the pedal. I'm gonna have to buy a 3/8" heim joint and then cut the stock loop off and tap the rod.
I then spent 4-5 hours mocking up the clutch master.
Here's what I've got going on under the dash (not done)
I then dropped in the steering column to see how it looked. Well once that was in I could tell the driver's seat was about 2-2.5" too far to the left. So I moved it over 2" and its much better now. No I have to make the bracket fit again with new mounting tabs and then get it powercoated once again. Opps!
Riddler
Spent most of the day in the garage working on the car. Today I wanted to start getting the firewall mocked up with the hydroboost and clutch master. So lets start with those.
Here's the hydroboost mockup.
I still need a few things to bolt the rod to the pedal. I'm gonna have to buy a 3/8" heim joint and then cut the stock loop off and tap the rod.
I then spent 4-5 hours mocking up the clutch master.
Here's what I've got going on under the dash (not done)
I then dropped in the steering column to see how it looked. Well once that was in I could tell the driver's seat was about 2-2.5" too far to the left. So I moved it over 2" and its much better now. No I have to make the bracket fit again with new mounting tabs and then get it powercoated once again. Opps!
Riddler