727 2nd to 3rd flare up

Hi.
I'm new to the 727 transmission also and by no means consider myself an expert but I just tore one down and rebuilt it ( not to mention I stayed at a LaQuinta last night) :)

Seriously though, what I learned is that he adjuster on the outside of the case above the lever is for the front band and holds the front clutch pack drum. The specification is to loosen the lock nut and torque it to 72 in lbs then back off 2.5 turns ( if your apply lever has a ratio less then 4.0). Then lock it down.

Some others suggested using a small wrench and turning the adjuster until it is snug then backing it off the 2.5 turns before locking it down.

Ratio adjustments:
less than 4.0 back out 2.5
4.2 & 4.25 back out 2.25
5.0 back out 2
other back out 2.25

I hope that helps... .

Good luck and let us know how you make out.

Take care.