Is there a true plug-n-play setup for a 5.7 with FI yet?

I think the cheapest way to get a 5.7 hemi installed and running is what I did, use the factory EFI. Almost plug and play, and for someone who's not looking for Max Power, just wanting the benefits of EFI, this is the way to go.

Complete Salvage yard engine, This is the key to not getting nickeled and dimed on EFI parts. (Mine was a 2007 Ram 11K mile pull out with auto trans, transfer case, harness and computer- delivered for $1200)

Parts to get it up and running:
Hotwireauto harness - $985 (almost as much as I paid for the engine/transmission)
Used 05 Ram 2500 w/ manual transmission computer - $195
Oil sending unit - $18
Used Drive by Wire pedal - $40

Total: $1238

All the other parts like:
Engine
Headers
Mounts
Fuel pump
Fuel lines
Oil pan
TKO transmission
Clutch
flywheel
Bell housing
Etc……

I would have had to buy anyway if I used a carb setup.

Carb would have cost at least $1843

Mod man intake and carb: $1148
MSD Ignition box $695

Just my 2 cents.