72 Swinger Project

For initial setup on the control arm poly ends

Lowers.... 3.5" from the center of the LCA bump stop cross-tube to the LCA axle centerline.This can be checked prior to install by simply sliding the axle thru the installed poly ends. Additionally, this procedure will assure the poly ends are lined up if the axle slides thru both poly ends smoothly.

Uppers...only leave a thread or two showing.

The hub w/ rotor will measure appx 12" ....with the face of the spindle @ 9-5/8" off the framerail.

Anything...anytime, please do not hesitate to call / e-mail /text ...your choice