Cam advice wanted

If you're 'just' changing the Camshaft, make sure you check the Valve Spring Pressure first.

If the Valve Spring Pressure is around #250 lbs. @ 1.20" Spring Height with the Valve Open, the
Compu-Cam XE-262 would also fit nice with that combination.

Lift............................ .462"/.470"
Duration..................... 262*/270*
Duration @ .050" Lift... 218*/224"

This Camshaft has an excellent response, and is a pretty good Cam for 'Mileage' as well.

The 'ramp' design is not too radical, and the Cam kicks in nicely at 1300 RPM's for
quick Low-End Torque.

Works fine with a Stock Converter, or +300 RPM over Stock Stall Converter.

Alot of guys call this Camshaft the 'Stock 340' "PLUS"

Works fine with 3.23 Gears, but is a Dynamite Street Cam with {3.55 or 3.91} Gears,
Headers and a Good 'Carburetor and Intake'.