Father-Son 1974 Duster Project

I was able to weld a 3/8 x 1" patch in the passenger side front roof pillar. There was a rust through on the vertical side of the windshield pocket. Coated the whole area after I ground down the weld with Chassis Saver. Going to apply seam sealer over the weld in case there are any pin holes in the patch weld.
I know it looks a bit ugly now but I only have a 4" grinder. Need to get a Dremel I guess.
The great thing about the Chassis Saver is unlike POR15, urethane primer adheres to it amazingly.