**73 Scamp Mini Pro-Street Engine Swap**

Suspension is installed, all 4 corners Done! NOS is 3/4 done. As you install these kind of upgrades for some reason things change as you go. 1 more clean up parts order is needed.

Got the Trans shift shaft seal leak fixed too. The new dipstick marks were wrong. I drained some fluid, no more leaky. I also fixed the sending unit fuel leak from where the back brace hit the sending unit wire. Took it apart drilled the ground strap off and used a shorter stainless bolt and the factory sealing washers. Tightened it all up and re installed it. Filled it back up with fuel... No more leaks.

I also bought a canton oil filter plate., it will get installed tomorrow. I'm going to be popping 2 more holes in the valve covers and weld 4 - 1 1/4 tubes onto them for external breathers. I'm gunna be revving the **** out of this motor so it needs to breath, Lol!

The install is not done and buttoned up yet, it is still in progress. I bought a used 3 Stage Retard for 100.00. It has the first 2 Retards wired and ready. The second and 3rd Retard have ZERO chips in them now but 2 is wired & Ready for a chip. Reason he does it this way is to have a good assortment of Retard choices when playing with how much you are going to spray. The chips are cumulative so say I put in a 4* and a 3* would =7* of Retard on the Hit.

The final parts list has been ordered.

View attachment php9DoSLDAM.jpg

View attachment phpr4XSuAAM.jpg

View attachment phpnLiJgJAM.jpg

View attachment phpS6FjbzAM.jpg

View attachment phpCbrsvuAM.jpg

View attachment phpBDT7G3AM.jpg

View attachment php7zLicBAM.jpg