plz help...dizzy upgrade problems

Now, if you had factory breakerless, that is a sort of supplement on page 8-146

What you have here now is two resistors, one above the other. THE TOP RESISTOR is actually wired exactly as a 2 terminal "points" resistor is wired, electrically

That is, you have the left side hooked to coil + just like above, you have the brown going up to the bulkhead just like above.

What is NOT clearly shown is that the right hand end is fed "ignition run" to both the top right and botto right terminals which are jumpered together.

This is represented by the "diamond 1" symbol which if you look is present on page 8-147