sure grip install

It's easy you should buy a dial indicator and a magnetic base. Cut a hole in a bucket set it bottom up insert the drop in ujoint down gears up. Install dial indicator so you can see measure your lash. Should be 2-3 thousand. Your ready to remove ring gear remove the caps that house the bearing adjusters and adjustment lock down remove carrier. Remove ring gear from carrier seems like the bolts holding the ring gear are left handed so use care on the first bolt holding ring gear on carrier. Make sure to get new bearings on the sure grip u buy unless your using a rebuild or just swapping in a good unit and have the old bearing races for the swap. Make sure to torque all ring gear bolts factory torque spec. Set sure grip into case with races installed install adjuster caps don't torq them yet screw in adjusters carefully until you get close on the lash rocking ring gear while adjusting once you get close reinstall dial indicator adjust lash 2-3 thousandths torque caps recheck lash if its still good install locks. You should be able to do this in several hours.