Help!

I cut mine out under neith at the triangle in the center of the hood and leave 2inch tabs that can be bent over to hold the two to gather and put a little windshield urethane (don't use silicone it will blister the paint and will rust) in places around the hole under side of the hood.then if you look there are more than likely holes allredy drilled for the factory scoops if not there is all ways one in the center in the back of the hood.to give you a starting point..thats whow I do it..saves a lot of masureing.just be carful its not back to far or your rear bolts will hit the cowl area!ask me how I know this!!!...just trying to help.......Artie