Help!

I put them on with windshield urethane drill holes in the scoop all the way thru the hood about every two inches for getting it and holding it where you want it. while all this is going on put the urethane in the oven turn the heat to the lowest setting..now make sure that scoop is where you want it because you only have like a 30 minute window before it sets up and once it does you will destroy the hood and scoop getting them apart..(if you go to napa and tell them you want the longest setting time urethan you can get. it seems like they change that stuff every week) buy now your say glue will be nice and warm and put a nice bead around the area of the scoop and I usually will put two long nails down threw the scoop so I can get it lined up without getting glue everywhere..then put all your screws in and letter set by the time you clean up the mess it will be race ready after taking out the screws.and if you can get the glue out of the tube I put some down threw the screw holes O ya I'd were a pair of gloves you can throw away.cuz if you get it on you it will have to wear off.Most of that stuff is paintable so you can finish it how ever you want..and it wont rust metal like silicon...have fun Artie