dropping down

I recently "dropped" my slant six out of the bottom of my 65 this way and loved it. The new small block is going back in the same way. I put mine up in the air at all 4 corners, unbolted, unhooked and labeled everything and then unlike others I hooked a cherry picker to my motor, put a jack under the tranny, unbolted the 4 K-frame bolts and then lowered the whole engine/tranny assembly down to a waiting movers dolly below. After that I hooked the cherry picker to the bumper bolts like the post above and lifted the front of the car until I had enough clearance to wheel the whole assembly out from under the car.