Who's got T56 in A body pictures?

I made my own crossmember as well. Similar in style to Todd's, but as I used a slightly different transmission (real Viper T56 as opposed to aftermarket T56 Magnum) I wanted to make my own to be sure it fit. Made some cardboard templates and used the plasma table at work to burn it out of scrap pieces. Also made mine a lot thinner (~1/8 pieces as opposed to 1/4) as I really don't think it needed to be so beefy. It's about the same thickness as the stock piece if not even a tad thicker. May be remaking the lower one because I forgot my jack had a leak when I made my templates. Lower crossmember sits mightly low and scrapes pretty easy. Can probably tuck it up about an inch higher for ground clearance.