67 cuda FB progress UPDATE

A 67 notch glass will work in the 68-9 gasket. The 4 different clips where for the corners and looking at them and measuring them the difference is so small I don't use them and buy bulk of the one common clip w/o issue.

The major clip part number is 6002263. I get them from here. They are the same clips for front. The screws are the same as the wheel well trim. I did use #8 pan heads last time and they did work fine. You just need to be more precise with height placement though. I still need to find a vendor to buy them in bulk at a reasonable price point.
http://www.althafastener.com/68-72-Mopar-windshield-rear-glass-moulding-clip_p_196.html


I DO highly recommend getting them before painting it though as the fitment is not exacting for the 67 since it never had them and the lines can be loose or tight depending... especially with the work you're performing in those area's. Last thing you want is to get to trimming it out and discovering they don't fit correctly.


Here is the link for the clip placement, but don't over think it it is not rocket science. The corners and where they join are more important then the rest.

http://www.forabodiesonly.com/mopar/showthread.php?t=167654&highlight=fastback+window+clip