SRT-4 2.4 turbo swap into an early A-Body?

a little info for this type of swap..

if you wish to use an automatic trans i have found 3 sources that offer adapter plates.

1. http://www.dynamicracingtrans.com/SportsComp.html
for the a904,a727,a998, a518
2. jmbperformance.com
for the BOP turbo 350
3. http://www.dcrsrt.com/index.php?_a=product&product_id=49
for a chevy turbo 350

if your going manual trans..

http://www.dynamicracingtrans.com/SportsComp.html

with this adapter you can bolt the la 318,340,360 bellhousing to the srt4/2.4 and use the a833 4 speed

or a small block quicktime bellhousing to a t56 trans
http://quicktimebellhousings.carshopinc.com/product_info.php/products_id/135453/RM-6072

an 03-04 jeep liberty, or tj wrangler bellhousing of the same years. or a dodge dakota 2.5 bellhousing. will bolt up to the back of the srt4/2.4 with no adapter. then the toyota r154 5 speed trans, or the MA5 5 speed trans from the colorado, solstice h3 or sky can be used.

if you use the MA5 trans. use the 2.4 flywheel, a chevy drive shaft yoke, and an s10 4 cylinder clutch disc from 94-04

use a jeep liberty oil pump and filter adapter. filter will then face forward.
the best water pump is the srt4.

if you use the 420a cylinder head, the intake will move to the passenger side and face the throttle body forward. and the exhaust on the passenger side, with turbo up front.

NOW THE GOOD NEWS IS THERE ARE 2 OF THESE SRT4/2.4 SWAPS CURRENTLY BEING DONE ON HERE RIGHT NOW!
here are their links:
http://www.forabodiesonly.com/mopar/...d.php?t=158780
http://www.forabodiesonly.com/mopar/showthread.php?t=218144