Engine shakes BADLY!!

GEO said

I think I try getting the initial timing back down to 12 degrees or so and work from there. And set the total timing to around 32 degrees

Click to expand...

With that cam that engine is probably gong to want 20*- 24* initial timing. Your going to have to get a new advance bushing or make your own. I would set it up with 34* all in by 2400 RPM.

Not enough initial timing will also make it hard to start and it will be lazy.

Ignition first, then tune on the carb. In that order or you will chase your tail.

That car sounds pretty damn good by the way!