Engine shakes BADLY!!

340Duster247 said

Thank you. The gaskets didn't even come off the main body side of the carb. I just removed the bowls and metering blocks. The accelerator pump does squirt right away but like I said I'm no carburetor jenius but have done my homework. The cam stuff gets confusing trying to figure out what cam works for what set up. I'll try orange and jump up in squirter.
Should I be worried about secondary squiriter size. It's a 31 now.


Haha makes me wanna bite the bullet and buy self learning efi

Click to expand...

Ok. You might need to go bigger on the secondary side too but for now leave the 31 in it. Get the primary's working correctly first then tune the secondary's. There is a lot to consider when choosing a cam. Took me a while to learn all the aspects and I'm sure there's still a good amount I don't know. I usually call up a good cam grinder (Bullet cams, Racer Brown, Lunati, Comp cams, etc) and talk it over with them and have my cams custom ground to the application. I know what generally works but their the experts and can recommend what's best.