front drums w/o hubs?

I am sure there are many methods that work the same as mine. But you never should hit the hub out of the drum. I never had the hole enlarged where the stud was loose when re installed. Maybe I've been lucky, but all I have done were not swedged the full diameter.

I like the hole saw/cutter method it is a good idea. I never had a hole saw with the small enough of an inside diameter. So this was never an option for me.

I could have put the drum in the mill and take off the head and drive them forward but never had to. The swedges usually tear off of the stud only leaving five marks in the hole. Could be I never lube them so they shear more then they gull the hole.

Sorry if I offended anybodies method. I tend to do that sometimes. After doing things for a long time it always seams to be the only way.

Having several dogs, they all piss different. Some squat and some lift their leg, but they do all achieve the same result in the end.