A bad pass

It's a r1a block 4.100 bore with a 4 in Calies crank. Diamond nitrous flat top pistons hard anodized. Scat rods 6.300 2 in pin with upgraded bolts. Custom bullet solid roller about 780 lift and 270 duration. Brett Miller cnc w9 heads 2.18/1.60 ti valves flow 397 at 800 with T&D rockers. Has 727 full roller trans with alum drums. 8 3/4 mopar 4.30 gear rear! Raced once a month at 10.0 indexes. Goes 9.51@141 on motor and has been 8.93@151 on a 175 shot. Just use in gone bar on crossbar plate trying to get the second kit turned on, not successful yet. I run pump gas on motor, driving it on the street and racing 10.0 index. When I run nitrous I put race fuel in it to be safe, I am sure I could get it to run on pump gas too.