Post pictures of ur race car here!

I have done a number of things. After the very first bumper dragging wheelstand that hit the oil pan when it came down I went from a 26 inch front tire to a 28 in front tire. I raised the frontend up about 1 1/2 inches and installed poly 2 inch bump stop on the lower control arms to keep from bottoming out. I completely went through the front end with tube upper arms with heim joints, boxed in the lower arms and used nylon bushings on the lower arms with Firm Feel greasable pins. I installed 11/16 tie rods from a b body and bought the soild adjusting sleeves from PST. I bought a set of adjustable strut rods also from RMS. have not had any problems since and that was about 4 years ago or 500 plus wheelstands. Here is a vid of the frontend. Its alittle dark til the go pedal gets smashed to the floor , pause it at 38 sec and you can get a look at the frontend.[ame]http://youtu.be/ux4dEsgBY7E[/ame]