Hows about a pic of the cam card so we know
what manufacturer/specs your working with.
If done right your card should be specific to your cam
Many vids on youtube to explain degreeing..
What I meant to say was each cam will be ground a little different
and it should have a card specific to that cam.
That's not how I've found it to be unless a custom grind.
If you get her zero'd in it will pay in spades.
I'd also check the balancer and housing pointer for TDC, mark the hub and ring
on the balancer, dizzy height and run a bronze gear on the
diz shaft if you can.
