To: Farina, James
Subject: Re: Dana 60 Order
Stock A-body pinion to perch angle is 5 degrees up. If you raise the front spring eye hole 1.5", while leaving the rear spring eye at the stock height, I estimate a 3 degree pinion to perch angle will compensate.
Cass
I am geting it powdercoated so they need to be welded on before coating.
Considering they make 4" spacers for springs i'm sure shims can correct it. The billet shims Dr. Diff caries are 3 degrees and are safe.
I can weld, that sin't the problem.