65 Barracuda w/500ci RB, Stage VI Max Wedge Port Heads, 6-speed, and 5.38 Dana
Yeah Brad! Looks familiar? Look at my hack job on the driver side shock tower, I had to cut it right at the shock bracket and gusset it. This is a low deck so it was closer. I know Rob was asking about a B motor in there. Your RB raises the headers off the idler arms though, something I had issues with in last photo and an attempt to space the idler arm. All I needed was motor 2 more inches to rear. Maybe relocate motor mount holes or motor plate and then cut driveshaft but if you are doing this already with a 6sp, may be an option for you. My advice, screw inners! run a J bar and tie in coilovers shocks..Dzus fasten AL sheets when down. OK, no more thread jacking! Charge it!
Yeah Brad! Looks familiar? Look at my hack job on the driver side shock tower, I had to cut it right at the shock bracket and gusset it. This is a low deck so it was closer. I know Rob was asking about a B motor in there. Your RB raises the headers off the idler arms though, something I had issues with in last photo and an attempt to space the idler arm. All I needed was motor 2 more inches to rear. Maybe relocate motor mount holes or motor plate and then cut driveshaft but if you are doing this already with a 6sp, may be an option for you. My advice, screw inners! run a J bar and tie in coilovers shocks..Dzus fasten AL sheets when down. OK, no more thread jacking! Charge it!