Good cam size for stock 318 bottom on boost

bigtommy said
Okay the only problem the bigger 112 or 114 cam I can find is .461 lift. I'd like a .528 or something or that too big oh a cam for turbo. Because I know too big of a cam I'll be slower then stock lol. And what's a good rpm range camshaft and stall so I can launch is with boost off the line.

Did you even look at the cams I speced for you? The crower flat tappet has 0.521 int./0.528 exh. 112 ls. The Crane is 0.480 int./0.500 exh. 114ls (and with a 1:6 ratio rocker would yield .505/.528

lift has very little impact on streetable charactoristics of a camshaft. Duration/lobe separation and overlap do.

bigtommy said
Buckshot, is that rpm range for that cam good? 3000 seems alittle high to start power. Or is that why I get a 3500 stall or higher?

That is an average range and it doesn't mean it won't make power below or above that range. It doesn't even mean you engine will make power in that range.

No disrespect, but you really don't seem to have enough experience or knowledge to undertake a turbo build.