67 cuda FB progress UPDATE

this is what it looks like after it has been filled in with the epoxy. WHAT A MESS!!!
After it dries (I'll give it two days to cure) I will file it down with some small files. Then I'll sand it with we/dry sand paper starting with 120 then progress my way down to 400 grit. I will also use a barrel type bit on my dremel tool to smooth out the rounded corners at the cross bars on the steering wheel. Wipe it down with wax and grease remover, prime, sand again with wet/dry 400, spray with sealer then paint. I haven't decided if I will clear coat or not yet. I'll post more pictures when I get to the filing and sanding portion of the process as this is as far as I have gotten today.
I forgot to mention that the upoxy won't stick to wax paper. so if you wanted to keep the epoxy on the less messy side, you would wrap the repaired areas with wax paper. I chose not to and paid for it with a mess. Also, be sure to wear some sort of sergical syle gloves and eye protection. SAFETY FIRST!

View attachment 0302141213a.jpg

View attachment 0302141213.jpg