360

Treblig said
KrazyKuda, I found this pic under tech tips at FABO. It's a very good way to ensure your drive gear is well lubricated. The small .030" hole doesn't even phase oil pressure but it makes a tremendous difference to the dist gear. I know I've seen other folks with worn drive gears and people are always looking for better quality dist drives because they wear out!!!. This solves the problem with worn gears. You don't have to do this but it's very good insurance for your dist gear. I will make sure I do it to my motor!!! BEST OF ALL IT'S FREE!!!!! if you drill it yourself before you install the plug!!

Treblig
Click to expand...


That's interesting. :supz:

Any idea what size hole it is? Maybe 1/8"? Smaller? Bigger? I wouldn't want to drill too big and loose some oil pressure. :sad1: :oops:

It's only free if you don't break your drill bit drilling through the plug, which is not hard to do with a drill bit with that small of diameter.... LOL! :hmph: :banghead:


Too much lubrication won't hurt you as bad as not enough!! ;) :violent1:


Sorry, I just read and finally sunk in it's a .030" hole - much smaller than 1/8 (.125"). Very delicate drill bit....