So how about that, front wheel flew off!

Alright well I put the new wheel studs in and bought a set of mag wheel lug nuts. I used blue thread locker and torqued then to spec, 65 lbs I believe?

I noticed that the lug nuts will tighten down all the way on the stud, almost bottom out.

When I put the wheel on the wheel studs, they only seem to get to about 1 cm or less to be even with the surface of the wheel. They do not protrude through the wheel stud holes on the mag wheels.

When I put the lug nut through the mag wheel, it seem that they only get to about 65-75% through the hole on the wheel.

On one of the pictures it almost looks like the lug but grabs about 80% of the threads on the wheel studs.

I take it everything is okay. I'm just a little traumatized after the incident that I thought I would double check! I'll post pics