Couple of questions about my 1973 340.

Hi everyone.

I picked up a 340 from my dad. It's a 1973 cast 3/20/73 with the number on the flat tab below the drain plug being 3B44374.

It's got the 360 596 casting number heads and I believe a comp XE268 cam with the matching springs. It currently has a performer 318/360 intake on it.

It's got the right dampener on the front.

The question is what do I use for the Flywheel. It's going into a 1966 Barracuda with a 904.

Also, Any carb recommendations with this combo. It's the stock 1.88/1.60 valves with just a light clean up on the ports and they are matched on both the intake and exhaust.

Thanks everyone,

Mike