69 barracuda fastback 383-s

ok heres a few pictures of the driver seat. I took the tracks apart by drilling the backside of the large rivet . this way the track will slide out. I didn't want the glass bead getting stuck in thr tracks.
I also threw in a picture of the heater box I restored!
Next is a picture of the clutch pedal. Besides cleaning and re-spraying the pedals I replaced the two sets of needle bearings on the pedal shaft.
The picture of the seat track has the white circle around the rivet . That's the rivet I drilled out and re-welded back in when I was done with the track!