fuel sending unit

-
MOUSE

MOUSE

Well-Known Member
Joined
May 13, 2010
Messages
145
Reaction score
17
Location
GLENDALE AZ
Does anyone have a way to use a gm sending unit , in a fuel cell, with a factory mopar gauge ? :sad1:
 
Nope. GM are opposite resistance change from Mopar

Ford and Mopar both got to lower readings when going towards full

GM goes towards a higher resistance
 
KitCarlson said:
Mouse,

With a small software change, the gauge calibrator circuit should do it. This is only an option if you work with electronics. I can send a chip if you build the circuit.
http://www.forabodiesonly.com/mopar/showthread.php?t=264543&highlight=calibrator

Here is schematic.
Click to expand...
brother . I appreciate your response but I'm talking about a 70 pro street dart. the biggest electronics in it will be the stereo. unless this is april fools .... took me a min. thanks
 
Let me ask you this.........why do you want to use a GM sender?
 
No April fools joke. I have been working with electronics since before the 70's. I am with 67Dart273, use Mopar sender. Or reverse sender internal connections and adjust resistor values on GM sender.
 
67Dart273 said:
Let me ask you this.........why do you want to use a GM sender?
Click to expand...
I had planned on doing a custom dash . so I got a fuel cell with a gm sending unit because most aftermarket gauges are set for gm. anyway my plans changed and it looks like I'll be getting a mopar sending unit.
 
Ah, I did. That changes everything. But some gauges, Autometer, etc, can be selected as to what you use. So you want to coordinate what you order.
 
You must log in or register to reply here.
-

Back
Top