Rapom's Rocket - just another Duster build thread

During my research I had looked at quite a few hydraulic clutch setups but they were all used in conjunction with manual brakes. Being me I had to be different and have power brakes. Getting this to work with a booster in the way was going to be uncharted territory. Because the MC has to be offset from the clutch pedal a link needed to be fabricated to connect the MC push rod to the clutch pedal. This link has to intersect the pedal no more than 2" below the pivot point of the pedal. This has been shown to be the sweet spot for proper geometry and full stroke of the MC. Some preliminary measurements and a few educated guesses latter it looked like the parking brake mechanism and bracketry would just clear my selected MC mounting point and that the push rod would be right at the magic 2" point. Yeah, I got lucky... I made a paper template of the mounting pad of the MC and used it to mark the fire wall for the best fit and the 1.5" hole saw to come. After the center hole was cut I stuck the MC in place to verify everything would clear before drilling the holes for the two mounting bolts.