Uneven LCAs help

We rebuilt the front suspension on our 72 Dart, didn't seem to have problem before but not sure. Now when trying to set ride height I have to crank the drivers side in most of the way and the pass side about 1/2 way where I would expect it.
With the height roughly equal the drivers control arm is at least 1/2" lower. If I jack up the k frame the pass side is several inches of the ground before drivers side comes up. If I jack the rear up the pass side tilts down.
I can't see any movement in the rear t-bar mounts. Do t-bars get weak or do I have a problem with driver side LCA?
This pic is of driver side