Uneven LCAs help

Not to bust chops, but the correct places to make your measurements are from the 'blade' in the middle of the LCA and then the bottom of the lower BJ. There should be 1" to 1 1/2" difference, meaning the bottom of the LBJ should be 1 to 1 1/2 inches lower than the 'blade' . The Blade is that round part in the middle of the LCA that the T-Bar goes into. You measure between the two plates that sandwich the blade. Ignore any other measurements, like if one fender or rocker is higher than the opposite side. After you crank on the t bar bolt, bounce the car a few times and let it settle, then measure.