360 LA cam selection

upgrading a 360 for my brother's 318 66 dart.

Car currently runs 13.5 101 mph
Car as is:
3000 lb
3.55 SG 26x8 QTP slick
2500 stall 904 stock gear set
9:1 318 268H Comp cam, hughes 1.5 roller rockers, rhoads lifters
home ported 360 smog heads 1.88/1.6 milled to 62cc
sanderson 1 1/2 inch small tube headers, 2 1/2 collector with cutouts
rpm air gap, demon 650dp

360 going in the car
73 block 30 over H405P 9.3:1
same home ported 360 smog heads 1.88/1.6 milled to 62cc

Car is street driven to car shows and is not a trailer queen; goes to the track once a month. Cam going in this motor is for power not noise.

Haven't ruled out a custom grind. Cam I'm looking at is Lunati Voodoo
Solid Flat Tappet.
Not sure if the 9.3:1 compression will be an issue. Lunati has 10+ listed.

Excellent hot street/strip cam with great torque and HP from low to high end. Needs 2500 RPM stall converter, headers, 10:1+ compression, 3.55-3.73 gearing. Lopey idle.
Advertised Duration (Int/Exh): 264/272
Duration @ .050 (Int/Exh): 235/243
Gross Valve Lift (Int/Exh): .525/.546
LSA/ICL: 110/106
Valve Lash (Int/Exh): .016/.016
RPM Range: 2400-6600
Includes: Cam Only
Part Number: 30200740
Previous Part Number: 60440

I'll send all this to Lunati, Erson, Howard, Bullet etc, but would like to get some thoughts from FABO.
Thanks Mike