Aussie VC 67 Dodge ute

the sides are to be fibre glassed to give some more shape....I Hot glue a piece of 6mm x 12mm MDF to the side and fill in with 12mm polyurethane sheeting, again Hot glued in place
it is then cut with a hack saw blade to make a bevel to the sides...it is then sanded to shape...the product is very soft so sands easily

View attachment 10.jpg

once hardened it is cut to size and sanded

View attachment 11.jpg


filled with builders bog and sanded smooth....this needs to be good enough to paint as any marks will show through the vinyl

View attachment 19.jpg

armrest lid from underneath

View attachment 12.jpg

marking out the cardboard form for the "MOPAR" logo on the front pocket

View attachment 13.jpg

the main pocket with one side removed to show the lighting

View attachment 15.jpg


the finished console.....21 individual pieces to cover it

View attachment 16.jpg

inside the front pocket

View attachment 17.jpg

inside the rear pocket/armrest

View attachment 18.jpg

many days went into constuction, then more than a day to cover it, and every measurement had to be to the milimetre, ...so that's how we get to $3,800!

with this and the pockets on the doors I have quadrupled the storage in my ute!