Wire Hook Up
View attachment 1714717596Well, geez, if you have the manual, it will tell you that.
Referring to the download here
www.letsgocomputers.com/docs/1973dodgechassis.pdf
from here
http://www.forabodiesonly.com/mopar/showthread.php?p=1970088617
See page 8-154,
Terminal 2 of the connector is wire J3-14BR goes to the terminal on the ballast which ends up at the coil+ terminal
Terminal 4 of the connector is wire G6-20GY is oil pressure sender
Terminal 6 of the connector is wire coil NEG wire. This feeds directly back to the Mopar ECU box
That connector is NOT the bulkhead connector. It is a loose connector in the engine bay that connects one part of the engine harness to the other. The bulkhead connector is the large connector which goes through the bulkhead / firewall. It is connector no CE2