1965 Dodge Dart Charger

So know everything inside the trunk is done.

Do you have the tire changing instruction sheet for the underside of the decklid? Yes, I have put it in place. Check!

Did you cut out a new piece of masonite for the spare tire cover? Yepp, it's done. Check!

The trunk mat in your pictures looks really good. Is it the rubber backed mat or the flannelette version? It's a rubber backed mat. Check!

Thanks for that Dan. Dantes had them and they looks really good. Tomorrow I will make date stamps for them from potatoes!!
I even added the small blackphosphated clips that holds the wiring harness inside the trunk lid!

Today I used my brother-in-laws's old headliner to get all the measurements. Hey, we even found a date code and a IMP stamp inside!!

After some measuring I chopped the channels on the backside cause they were too long. Now the bows is visible about 2 inch on each side. According to the shop manual the start was at the rear glass. Attach the rear headliner bow with the spring in the rear upper roof bow. And after a while me and my friend Johan stopped with the front bow. Then we glued the front of the headliner and then at the back. BUT, I forgot I need the cardboard sides on the inside of the C-pillar post. So they need to be made before I can do the sides on the headliner.

So far the result is ok, I have never done this before!!