Will GM 200r4 work with factory floor shift location?

Few extra pics. I quit!!!! Until Monday, I should be able to finish the trans lines, connect them to the HD cooler. Then raise the trans 1/8" or so because I realized that if it's even one degree lower than stock the exhaust pipes won't mate perfectly with the manifolds. I mean it's pretty close right now but another 1/8" would make it perfect. All it takes is a simple spacer between the trans mount bracket and the rubber mount or a spacer between the rubber mount and the trans mount pad. Dips stick tube, trans inspection cover, put a dent in the driver's down pipe for the starter, bolt up the converter, check for driveshaft length and maybe drink a BEER!!!! I deserve it!!!!!!!!!!!!!!!!!Treblig