thoughts on cam?

Hey everybody, I am wanting to go a step down from my current cam which is the Comp XE284H. 284/296 .507/.511. I like the cam but it's just a little too radical for the stop and freeway driving I usually do. I was thinking about switching to a hydraulic roller such as this one by lunati. #72337-16. The overall goal is to have a nice driver that can still run high 12's. The motor is a 77 10:1 360 with ported X heads air gap 750 cfm carb msd everything tti's. It has a 727 w/ a 2500 rpm stall and 3.55's and I'm not switching the gears because of all the freeway driving I do. Any advice would be helpful. Thanks.