Building the 318/390 stroker

So I'm going with the 318 bored .030 over, 4340 forged steel 4.000 stroke crank, 6.123 H-Beam rods, and forged step dish -23cc will be 9.8:1 when all said and done with aftermarket aluminum heads.

Anyway I've been looking for a cam for it and found this. It will be a weekend warrior.

http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=651&sb=0

Not very good at building motors, but is this a good cam choice? Will 1.5 rockers be a good choice with these?

Let me know if you need anymore info.

Also wil a 750 double pumper with mechanical secondaries and electric choke be good for this combo or will I need a bit bigger?