quick 318?

I would rather run something like this in a 318. With a 1.6 rocker, and the cam advanced on say a 102-104 ICL it should really run well I think.

http://www.summitracing.com/dom/parts/hrs-711262-08/overview/make/dodge

Or if you really wanted to step up, install this roller on a 101ICL. With 10:1 compression I think there is potential for some nice power.

Again, both would need looser converter and steeper gears, but that is a given when running at this cubic inch. I only chose the howards since they are a good bang for the buck, although there are more modern grinds out there that would work as well