'68 Barracuda Notch
I like it! Now the rear wheels do not look out of proportion. It is subtle, but it is one of those things that my eye is drawn to. I hope you like it, especially since this is your car!
1" less drop in the rear will look good. Here are some pictures on how we trimmed / rolled the rear lip on my car. The two pictures with the yellow masking tape were taken before they sprayed the bed liner material, the yellow is on the lip and highlights what was trimmed and rolled up. That will be difficult to do with the wheel lip trim. You may want to trim it similar to the way the front wheel lip trim is done from the factory if you keep the trim.
I got the tires swapped out today. I took it for a spin around the block and there is some slight rubbing on the outside edge. I think I may just be too low in the back. I have 3" lowering blocks, so I think I'll try swapping in some 2" blocks. I'm already sitting a little lower in the back than the front and I like a little rake. If that doesn't work, I'll have to trim the lip or roll it back some.
<a href="http://i207.photobucket.com/albums/bb109/Rymanrph/Barracuda/53C341D7-9782-47D6-BA4A-084EDFDFB5D3_zpsydgc54db.jpg" target="_blank">
I like it! Now the rear wheels do not look out of proportion. It is subtle, but it is one of those things that my eye is drawn to. I hope you like it, especially since this is your car!
1" less drop in the rear will look good. Here are some pictures on how we trimmed / rolled the rear lip on my car. The two pictures with the yellow masking tape were taken before they sprayed the bed liner material, the yellow is on the lip and highlights what was trimmed and rolled up. That will be difficult to do with the wheel lip trim. You may want to trim it similar to the way the front wheel lip trim is done from the factory if you keep the trim.