Frame Conectors instructions

mopwr2004a said
you can get the frame spec sheet off Ebay I bought one and it covers alot of A-body year models.

if I can find mine I will try and post a pic of it.

if you have a welder and basic grinder with a cutoff wheel and some other hand tools you can make what you have work.

put the car on jack stands. put it only under frame sections not moving suspension.

using the door sil as a place to put a level front to back and see what you have.

then take a long piece of material that is straight lay it from door to door sil, you mave have to take the seats out and make sure you go over the trans tunnel and see if level side to side. that will tell you if the car is twisted.

from the looks of the frame damage it looks like it was hit in the rear.

No! not been wrecked, Still has all the factory Original Lead Paint on it.

At first i thought it was from some one trying to us it off road, like a truck. But now that i have examine a lot close............ the dent in the sub frame was from a small floor jack, with the jaws not centered across the sub frame(it could have vary well have been myself!)
For many of years the slicks road on the back seat and i would change them at the track. Used a small floor jack that i could fit in the trunk. would jack up one side high enough to put the slicks on and uncork the headers!