1968 Barracuda Notch - Plano, TX

A few weeks back I took some scrap 1" square tube, some scrap angle iron and cobbled together an engine cradle. I took it down to the shop, cut pieces to length with the chop saw, drilled holes for the mounts, and welded it together with a MIG welder. I made the base a rectangle the correct size to sit on a furniture dolly I already had. Cut the to fit so that if the base is resting on the ground the oil pan has about 1/4" clearance. Total cost $20 for a 1000lb furniture dolly I already had and now I have a roll around engine cradle in my garage. Brought the engine home today and remembered to take a few pictures.