1970 Swinger 340 Hemi Orange 4 speed
Originally the Roof/quarter area was mig welded togather here and they never even welded the panels to the brace behind, so I added some plug welds to strengthen this area. (The other side was spot welded to the brace)
Ground where plug welds will be.
Weld thru primed.
Had to slice the seam in three spots so I could make the quarter follow the door (this quarter did not fit well)
Panel bonded this area.
Quarter clamped in place and rear valance and end cap installed to make sure everything is ligned up.
Big gap will be addressed.. All welded in and fought me the entire way!
I will finish welding the quarter on during the week... It's about 50% welded
Originally the Roof/quarter area was mig welded togather here and they never even welded the panels to the brace behind, so I added some plug welds to strengthen this area. (The other side was spot welded to the brace)
Ground where plug welds will be.
Weld thru primed.
Had to slice the seam in three spots so I could make the quarter follow the door (this quarter did not fit well)
Panel bonded this area.
Quarter clamped in place and rear valance and end cap installed to make sure everything is ligned up.
Big gap will be addressed.. All welded in and fought me the entire way!
I will finish welding the quarter on during the week... It's about 50% welded