How do I measure cylinder to see how much has been milled off???
Measure from the deck to the quench pad on the intake side of the chamber with a depth mic or a depth attachment for a calipers. Should be roughly .095" from the ones I have checked.
The area at the lower portion of the chamber in this picture.
The rocker rails are cast so poorly its not a good reference point.
Measure from the deck to the quench pad on the intake side of the chamber with a depth mic or a depth attachment for a calipers. Should be roughly .095" from the ones I have checked.
The area at the lower portion of the chamber in this picture.
The rocker rails are cast so poorly its not a good reference point.
