318 exhaust manifolds on a 360

As it turns out there are many vehicles that came with the magnum engine (5.2 and 5.7) but not that many that came with the large hole manifold. They used magnum engines in:
92-2000 Dakota
92-2002 Ram
98-2000Durango
92-93 Ramcharger
92-2003 Ram Van
93-98 Jeep Grand Cherokee

It also doesn't matter whether it's the 5.2 or the 5.7 engine.
But I am finding that many of these vehicles use the 53010187 casting which is 1 7/8" exit hole. Yes, it's basically the same shape as the one I sell and would give you more flow than stock (1 5/8") but it would not match the 340 driver's side by a long shot. In fact the 5301087 looks exactly like it's bigger cousin casting 53009376....REMEMBER, the Hollander numbers will be different!!!! They look like the same casting except for the exit hole size. Same thing goes for the driver's side mag manifold, it also has a look-a-like which was used on many vehicles. But the only driver's side that I believe won't work is the driver's side Jeep Grand Cherokee which has an exhaust flange that turns inward towards the Mopar starter. Yes, if you had a Jeep 360 motor with the trans and starter (on the passenger's side) it would work. More about the driver's side later...gotta go!!!!!!!
Happy Hunting!!!

Treblig