Old D/C Hustle Stuff Mechanical 6 Pack 4782/4783 carb build

had to dump the log could not get it to stop weeping no-mater what i tried! took it out for a longer drive. when the secondary's open its like being shot out of a cannon!! very wicked!! only problem now is coming to a stop the idle dips down to 500/400 rpm or so it has not died. idles fine in park at 950 drive 850, timing is at 20 initial, float leval is just at bottom of sight hole.



Outboards like to be a touch higher, so might your center carb. Make sure your power valve is half the idle vacuum. Use an anti-slosh tube in all the carbs, small plastic Holley part. Check for ANY vacuum leaks. Are you running vacuum advance? If so be sure it is hooked to manifold vacuum. Insulate your fuel line around the motor with some kind of reflective heat sleeve. Are you running a thermostat? What temp is it? Do you have a fuel pressure gauge on it? What is the fuel pressure?