Need advice big time on steering shaft removal.
Punch out the roll pin shown in these pictures.
Also, you may need a helper to hold the steering wheel still while you pound out the roll pin as it will want to turn while you are pounding on it.
I believe that it takes a 1/4" punch to do this (it's been a while for me).
View attachment Steering Coupler A04 B.jpg
Here it is circled:
View attachment Steering Coupler A04 B2.jpg
Here's a closer view:
View attachment Steering Coupler A06 B.jpg
Here's the close up circled:
View attachment Steering Coupler A06 B2.jpg
Then pry the coupler off of the steering box.
Print