416 - Solid Roller Camshaft Recommendation

Thanks for all your good advice, I think the only way to go is to get a custom ground solid roller cam made to suit the combo. Going to have a word to Brian Hafliger from IMM.

Update: I've bought a new top end setup for the 416 short motor. I have a fresh pair of W7's with a 7 angle competition valve job, 2.20 / 1.625 valves, and flow 350 / 250 cfm at 0.700' lift. These come with a big Arrington intake and a set of 1.7 ratio T&D's. There are also spacers for the intake to suit a 59 degree block and a valley cover. The W7's suit a 59 degree block.

What cams do you guys run in similar pump gas combos?
What type of solid roller lifter works for a street driven car that will see some limited track time?